With Garmin’s NMEA 2000 Rudder Angle Analog Adapter aboard your vessel, you
can give new life to your old gauges by making the transition from analog to
digital. This simple-to-install adapter takes the data generated by traditional
analog gauges and converts the data into a NMEA 2000 signal so you can create
or expand your network without replacing all of the equipment on your boat.
Connect to Your Network
With the Garmin GRA 10 adapter, you can convert analog information provided
via the rudder-angle sensor (not included) on your boat to your NMEA 2000
network. The GRA 10 allows you to observe rudder-angle information on
compatible Garmin display devices connected to your NMEA 2000 network.
Upgrade With Ease
Garmin’s line of NMEA 2000 Analog Adapters are easy to add to any existing
marine network. Once installed, the data from the adapters can be viewed via
the Garmin GMI 10 Digital Marine display and other compatible Garmin devices.
This easy-to-use set-up will help you bring your older dashboard into the
What's Included In The Box?
The Garmin GRA 10 Rudder Angle Adapter ships with the following items included:
Garmin GRA 10 Rudder Angle Adapter
Integrated cable (4.9m)
Garmin NMEA 2000 T Connector
1. Unit dimensions, WxHxD:31/32in x 43/64in x 3 3/32in (24.7 x 17.0 x 78.6 mm)
Total Cable Length: 16 ft. (4.9 m)
Temperature Range: 5F to 158F (-15C to 70C)
Compass Safe Distance: 2 in. (5 cm)
Power Input Source: 9-16 Vdc from NMEA 2000 bus
NMEA 2000 Power Usage: 1.1 W Max
NMEA 2000 Load Equivalency Number (LEN):2 (100 mA)